中文版 English

Blog

BLOG

All categories >

Enterprise News

Industry News

Home page

LED decorative light application parts

led decorative light manufacturers remind you: LED because its color is very rich and colorful, small, durable, environmental protection and energy saving, LED is very suitable for the main use of decorative design. Mounted on circuit boards or flexible cables or other raw materials, leds can be used as light sources for alphabet lights, signs, track spotlights, and led tubes.

Characteristics and design concepts of led decorative design lanterns

LED exciting digital display tube: Externally operated six-section guardrail tube is usually used to light up the wheel corridors of housing buildings. Data tubes can be created in hundreds of different ways depending on the data signal connection of the automatic control system. Data rectifier tube itself is a low power consumption product, is the contemporary lighting effect lighting project selection products. LED wall lights are taken over LED lighting products in the landscape and wall lights. The light source has the practical effect of shooting out stars in the night sky. It enhances the aesthetic limit of the visual effect of the traditional lighting effect. It should be hung on the flowers and trees, along the house and on the wall surface. It is especially suitable for doing government projects and hanging on the trees on both sides of the street office and its ecological parks, scenic spots and road greening, etc., to increase the beautiful scenery for daily life. led decorative design lamp hue can be according to your hobby, choose at will, at will match, humanized design concept is completely up to you. --led decorative lamp manufacturers

Modeling design lighting fixture daily maintenance

After a period of time, the lighting fixture will accumulate a thick layer of ash, which will harm people's visual effect and must be removed regularly. In the whole process of clearing, pay attention to the need not to change the structure of the lighting fixture, nor do you need to remove the components of the lighting fixture at will. After cleaning and maintenance, the lighting fixture should be installed according to the original state, and there is no need to install less or misinstall the lighting fixture parts. General lamps and lanterns are scrubbed with wet cloth, and special attention is paid to avoid moisture intrusion. If lighting lamps and lanterns are non-metallic materials, wet rags can be used to wipe them to prevent dust accumulation, which will hinder the actual effect of lighting lamps and lanterns. In order to maintain the crystal ball or amethyst sheet for a long time, it is necessary to prevent the harm of kitchen lampblack to crystal lamps. 2, the cleaning of crystal lamps can choose one by one to clean the glass ball or amethyst pieces, such as feeling inconvenient, you can spray professional cleaning liquid on the crystal lamps, cleaning agent in the evaporation of the link can take away the dust above the glass ball or amethyst. Regular power switch lamp application, do not often switch the lighting fixture, because when the light bulb is often operated, the electricity flow through the tungsten wire to exceed all normal business of the electricity flow, this will make the temperature of the tungsten wire rise suddenly and accelerate the rise, which will further improve the tungsten wire increase rate. ----led decorative lamp manufacturer

03-07

2024

Heat dissipation area and connection mode of festival lights

1, dream light festival lamp source provisions for the radiator. Appearance and raw materials: if the sealing regulations of the commodity are not high, it is likely to produce thermal convection immediately with the natural environment of the external gas. Aluminum or copper radiators are more highly recommended. 2. Effective heat discharge area of street lamps and socket lamps: for festival lights, LED white lights with 1W power (other colors are basically the same), heat pipe radiators are usually used for heat discharge, with a total area of more than 50 square meters. For 3W products, it is highly recommended that the reasonable heat dissipation area of heat pipe radiator is more than 150 cubic centimeters. According to the standard and test results, higher output power will be increased. Ensure that the temperature of the heat pipe radiator does not exceed 60°C. 3. Wiring method with large LED power of festival light source: When connecting the radiator with the LED substrate with large power of festival light, please ensure that the contact on both sides is flat, so that the two contact more caters to each other. It is proposed to coat the bottom of the lamp plate or the surface of the radiator with a layer of thermal conductive silica gel for heat transfer. It is necessary to evenly wipe the cooling paste, and then fix it with screws. The traditional shape lamp is expressed by the prepared processing technology. Nowadays, we will use large and medium-sized landscape lighting method to mainly show the modeling lamp, not only preserve the characteristics of traditional processing technology, but also make the modeling lamp from small and medium-sized to large and medium-sized, from no flash to flash. In the urban trunk road, Yingbin Avenue, view ring road, city square, tourist attractions, ecological park these places, can use modeling light landscape lighting decoration design decoration and even lighting lamps, show a harmonious, warm, auspicious atmosphere. ----led Christmas light manufacturers